|
Price: $39.99 | Compatible Devices: Leica R10 GNSS RTK Base & Rover Station, AR10 High-Precision Reference Antenna, AS10 Compact Survey Antenna; Matching Accessories: R10 TNC Antenna Connector, R10 12-Pin Data Power Connector, PDL Whip Antenna Kits, A00470 PDL Programming Cable
This OEM-spec R10 top radome solves outdoor antenna protection defects for Leica R10 RTK survey equipment: original radome cracked by field collision, long-term UV sunlight aging brittle & yellowing, snow/dust/bird droppings accumulation causing GNSS signal attenuation, inferior aftermarket radome mismatched dielectric material leading to phase center offset & multipath interference, loose snap fit allowing rain/mud seepage corroding internal antenna LNA circuit, and damaged radome failing to shield antenna element from wind sand impact. Low-loss microwave-transparent special polymer integrated top radome with anti-UV coating and precision snap locking structure, fully protect AR10/AS10 antenna core while retaining factory-standard multi-constellation high-precision signal tracking performance for open-pit mine topographic survey, highway control network layout, tunnel long-term deformation monitoring and large-area rural cadastral mapping RTK projects.
Product Overview
The Leica R10 dedicated top radome is a professional upper protective cover spare part exclusively matched with AR10/AS10 geodetic GNSS antennas used with R10 series RTK receivers. Complete integrated one-piece structure: low dielectric constant microwave transparent composite polymer main shell, full-surface UV stabilizer anti-aging coating, aerodynamic streamlined outer contour, internal precision snap positioning rib, built-in surrounding waterproof dustproof sealing soft edge, anti-bird perch uneven top surface design. The special antenna radome material features ultra-low signal attenuation, nearly no phase center shift or beam distortion for GPS/BDS/Galileo/GLONASS full-band L-band satellite signals, consistent with Leica original antenna RF electromagnetic design standard. Thickened shell structure absorbs impact force during mountain rock collision and backpack extrusion, avoid direct damage to fragile internal antenna oscillator and LNA low-noise amplifier. Anti-slip snap rib design ensures tight lock on antenna base after installation, eliminate radome looseness under strong wind and vehicle transport vibration; uneven top surface prevents bird roosting and droppings accumulation that block satellite signals. Surrounding integrated soft sealing edge blocks rainwater, construction slurry, sand dust from penetrating antenna inner cavity, effectively extend service life of internal precision RF components. Direct snap-on replacement without tool disassembly during field maintenance, no need for antenna phase center recalibration after installation.
Core Advantages & Practical Structural Design
- 100% OEM outer contour, snap positioning dimension, dielectric material and sealing edge structure fully consistent with factory original R10 matching antenna top radome, direct snap-on replacement for cracked, aged yellowed or loose original protective cover
- Low-loss microwave transparent special composite polymer, minimal signal attenuation and phase center deviation, will not degrade centimeter-level RTK positioning precision compared to generic plastic imitation radomes
- Full layer UV anti-aging stabilizer coating, long-term outdoor plateau, open-air strong sunlight environment no yellowing, brittleness or cracking, adapt all-weather survey construction work
- Aerodynamic streamlined shape reduce wind load pressure on antenna mast; uneven anti-bird top surface avoid bird perching, eliminate signal shielding caused by bird droppings accumulation
- Integrated surrounding soft foam sealing edge, fully isolate rain, mud, dust and snow from entering antenna internal cavity, prevent LNA circuit short-circuit and corrosion damage
- Internal multi-group precision snap positioning ribs, tight lock fit with AR10/AS10 antenna base, no radome falling off under strong wind, vehicle bump and frequent field moving
- Wide cross-equipment compatibility: perfectly match Leica R10 base & rover GNSS receiver, AR10 reference station high-precision antenna, AS10 compact field antenna, coordinate with R10 TNC connector, 12-pin composite interface and full PDL radio accessory set
- Compatible matching accessory: Trimble TSC3 / TSC2 Yellow Nylon Carrying Case ($25, 0.2kg, 18 × 12 × 10 cm)
- Lightweight thin integrated radome cover, separate anti-scratch plastic bag packaging, easy classified storage in instrument maintenance tool pouch alongside antenna RF connectors, programming cables and GNSS positioning hardware
R10 GNSS RTK Base/Rover Station Antenna Maintenance & Field Survey Application Scenarios
Necessary antenna protective maintenance spare part for rural large-area cadastral boundary mapping, municipal highway control network measurement, urban tunnel long-term deformation monitoring, open-pit mine high-precision topographic survey and bridge static observation Leica R10 GNSS RTK projects. When original top radome cracks, ages or loosens leading to frequent weak satellite tracking and RTK fixed solution instability, survey maintenance technicians directly snap on this OEM radome cover, instantly form complete all-weather protection for AR10/AS10 antenna core, effectively block snow, sand, rain and bird pollution interference, guarantee continuous stable multi-constellation high-precision positioning all day long. Low-loss dielectric material completely avoid aftermarket radome induced phase error and multipath noise; anti-UV thick shell reduce antenna internal RF component aging speed and instrument failure rate. Store this R10 top radome and other tiny survey maintenance peripherals in our high-visibility yellow nylon data collector case; reinforced canvas belt loop supports waist hanging for convenient cross-region field instrument repair transport.
Product Specifications
| Official Part Name | Leica R10 Matching AR10 AS10 GNSS Antenna Top Radome Protective Cover |
|---|---|
| Main Shell Material | Low Dielectric Microwave Transparent Composite Polymer With Full UV Anti-Aging Coating |
| Structural Design | Aerodynamic Streamlined Shape, Anti-Bird Uneven Top Surface, Internal Snap Positioning Ribs |
| Sealing Component | Surrounding Integrated Soft Foam Waterproof Dustproof Sealing Edge |
| Matching GNSS Antennas | Leica AR10 Reference Station Antenna, AS10 Compact Field Survey Antenna |
| Applicable GNSS Receiver | Leica R10 RTK Base Station & Rover Station Host |
| Electromagnetic Performance | Ultra-Low L-Band Signal Attenuation, No Phase Center Offset, Suppress Multipath Interference |
| Operating Temperature Range | -40℃ ~ +70℃ Industrial Wide Temperature Grade, Anti-Brittleness At Low Temperature |
| Mounting Method | Tool-Free Snap-On Quick Installation & Replacement |
| Core Function | OEM top protective radome cover to shield AR10/AS10 antenna internal oscillator & LNA from wind, rain, snow, UV and impact damage without sacrificing GNSS signal tracking precision |
| Unit Net Weight | 0.042 kg |
| Stock Status | In Stock, Fast 24-Hour Global Dispatch, Independent Anti-Scratch Plastic Bag Packaging |
| Matching Carry Case Specs | Yellow Wear-Resistant Nylon Case, Price $25, Weight 0.2kg, Dimension 18 × 12 × 10 cm |
Matching Survey Accessory: Trimble TSC3 / TSC2 Yellow Nylon Carrying Case ($25)
Constructed with thick tear-proof nylon fabric, this bright yellow field protective bag shields Trimble TSC2 & TSC3 handheld data collectors from scratches, dirt and minor impact damage. Equipped with solid canvas belt loop for waist mounting, the independent front storage compartment holds R10 antenna top radomes, R10 TNC antenna RF connectors, R10 12-pin composite data-power connectors, full PDL whip antenna kits and A00470 PDL programming composite cables. 20 units available in warehouse for immediate worldwide shipping.
Browse more Leica R10 / AR10 / AS10 GNSS RTK maintenance spare parts, antenna protective radome covers, RF interface connectors and radio transmission wiring accessories on xsurveying.com. We supply full series OEM-standard survey antenna protective replacement hardware to provide full all-weather shielding for AR10/AS10 high-precision GNSS antennas and maintain stable centimeter-level RTK positioning performance of R10 receivers for uninterrupted open-pit, tunnel and highway precision field measurement workflows.
