Price: $78.99 | Compatible Hardware: Leica ATX1230 SmartAntenna, GS12 Viva GNSS Rover, GPS1200 / System1200 Series GNSS Receivers; Matched Field Kits: RX1210/RX1250 Controller, GEB221/GEB222 Lithium Batteries
This OEM original GS12 ATX1230 integrated keypad solves core GNSS field operation failures: original rubber key aging, key failure / unresponsive input, cracked panel causing water/mud intrusion, lost factory built-in control panel, unable to set RTK base-rover parameters directly on antenna, screen shortcut function invalid, generic third-party keypads mismatched pin definition leading to receiver startup failure. Original factory integrated button panel fully matches ATX1230 smart antenna internal circuit, supports independent GNSS parameter configuration without connecting external hand controller for lightweight portable RTK survey work.
|
Product Overview
The Leica GS12 ATX1230 dedicated built-in operation keypad is an integrated control panel exclusively customized for Leica ATX1230 GNSS smart antenna and GS12 Viva rover receivers. Adopts integrated silicone rubber key + PCB control board one-piece structure, embedded installation inside ATX1230 antenna housing, no extra external bracket required. Layout includes power on/off key, five-way navigation OK key, Fn function shortcut, numeric & letter composite input keys, brightness adjustment, favorites quick access and ESC back key, fully consistent with Leica SmartWorx Viva operation logic. Internal PCB board uses gold-plated contact pins to prevent oxidation after long-term outdoor mud, dust and moisture erosion; outer silicone key layer with matte anti-slip oil-resistant coating, UV aging resistant, low-temperature soft and non-cracking for mountain, mine, tunnel and construction harsh field environments. Full set includes keypad PCB assembly, waterproof sealing rubber ring and internal fixing screws for direct disassembly and replacement of damaged original panels.
Core Advantages & Practical Structural Design
- 1:1 OEM circuit layout and key contour consistent with factory original GS12 ATX1230 keypad, direct plug-and-play replacement without circuit modification
- Integrated multi-function full key layout, supports standalone GNSS operation: power control, coordinate input, RTK radio frequency setup, satellite tracking status check, data recording start/stop, no mandatory CS/RX handset connection for quick simple measurement tasks
- High-elastic thickened silicone rubber key layer, long service life over 500,000 presses, no sticking or unresponsive failure after frequent field operation
- Built-in complete waterproof dustproof sealing ring matching ATX1230 antenna housing, effectively prevent rainwater, construction mud and fine dust from penetrating internal PCB circuit causing short circuit damage
- Gold-plated PCB contact terminals, anti-rust and anti-oxidation, stable signal transmission without intermittent key failure caused by long-term outdoor use
- Compact embedded integrated structure, perfect fit internal installation cavity of ATX1230 smart antenna, reserved original screw fixing holes for fast maintenance disassembly
- Wide cross-series compatibility: ATX1230 GNSS smart antenna, GS12 Viva lightweight rover, GPS1200/GX1200/GRX1200 System1200 GNSS receiver series, matches GEB221/GEB222 lithium batteries and all GEV GNSS data cables
- Compatible matching accessory: Trimble TSC3 / TSC2 Yellow Nylon Carrying Case ($25, 0.2kg, 18 × 12 × 10 cm)
- Flat lightweight integrated assembly, easy to store in instrument maintenance tool pouch together with spare antenna housings, GHT brackets and GEV communication cables
Lightweight Standalone RTK Field Operation Application Scenarios
Indispensable original maintenance replacement accessory for small-area cadastral mapping, pipeline quick stakeout, rural boundary survey, mine auxiliary topographic mapping and emergency temporary GNSS measurement projects. Survey technicians install this GS12 ATX1230 keypad inside smart antenna housing, enabling direct adjustment of RTK radio parameters, starting static recording and checking fixed solution status on the antenna without carrying CS10/CS15 heavy field controller, greatly reducing portable equipment weight for short-distance rapid survey tasks. Complete waterproof sealing design avoids circuit short-circuit damage when working in rainy construction sites. Store this integrated GNSS keypad assembly and other tiny survey maintenance peripherals in our high-visibility yellow nylon data collector case; reinforced canvas belt loop supports waist hanging for convenient field instrument repair transport.
Product Specifications
| Applicable Model | GS12 Viva GNSS Rover, ATX1230 SmartAntenna |
|---|---|
| Structure Form | Silicone Rubber Key + Integrated PCB Control Board + Waterproof Sealing Ring Assembly |
| Full Key Functions | Power, 5-Way Nav/OK, Fn Shortcut, Numeric-Alpha Composite, Brightness, Favorites, ESC Back |
| Key Material | Anti-UV Matte Elastic Silicone Rubber, Oil & Mud Resistant |
| PCB Contact Treatment | Gold-Plated Anti-Oxidation Conductive Terminals |
| Waterproof Grade | IP64 Matching Original Antenna Housing Sealing Standard |
| Matched GNSS Equipment | ATX1230 SmartAntenna, GS12, GX1200, GRX1200, GPS1200 Series Receivers |
| Matched Batteries | GEB221, GEB222 7.4V Lithium Survey Batteries |
| Core Function | Built-in independent operation control panel for ATX1230 / GS12 GNSS receiver standalone parameter setting & measurement control |
| Unit Net Weight | 0.078 kg |
| Stock Status | In Stock, Fast 24-Hour Global Dispatch |
| Matching Carry Case Specs | Yellow Wear-Resistant Nylon Case, Price $25, Weight 0.2kg, Dimension 18 × 12 × 10 cm |
Matching Survey Accessory: Trimble TSC3 / TSC2 Carrying Case ($25)
Constructed with thick tear-proof nylon fabric, this bright yellow field protective bag shields Trimble TSC2 & TSC3 handheld data collectors from scratches, dirt and minor impact damage. Equipped with solid canvas belt loop for waist mounting, the independent front storage compartment holds GS12 ATX1230 replacement keypads, GEV series GNSS interconnection cables, GHT pole mounting brackets and screen protectors. 20 units available in warehouse for immediate worldwide shipping.
Browse more Leica Viva GS series GNSS spare parts, ATX smart antenna maintenance components, GEB lithium batteries and RTK mechanical accessories on xsurveying.com. We supply full series OEM-standard survey replacement hardware to restore standalone operation function of GS12/ATX1230 lightweight GNSS rovers for efficient portable field measurement workflows.
