Price: $58.99 | Compatible Model: Leica TS30/TM30/TM50/MS50 High Precision Robotic Total Station, GS10/GS14/GS15 GNSS Receiver, TDRA6000 Laser Station, External Battery GEB171 / GEB371
This OEM-spec GEV219 external power lead solves high-end survey instrument power supply troubles: short runtime from built-in internal batteries, unstable voltage triggering automatic tracking & EDM ranging failure, cracked original factory power wiring, loose Lemo contacts causing intermittent power cutoffs, instrument shutdown during long-hour tunnel/deformation monitoring, and signal interference near construction power equipment. 1:1 replicated factory pin definition delivers steady continuous high-current power supply for Leica premium robotic stations and Viva GNSS receivers.
|
 |
Product Overview
The Leica GEV219 external power cable with official OEM article number 758469 is a dedicated 1.8-meter power connection wire customized exclusively for Leica TS/TM high-precision robotic total stations, multi-stations and Viva GNSS equipment. One end adopts bayonet-locked Lemo 1B 8Pin male plug matching instrument dedicated external power port; the other end is Lemo 0B 5Pin male connector for direct plug-in to GEB171 large-capacity external battery packs. Built with thick full copper high-current wire core and double-layer shielding, plus wear-resistant anti-UV PUR outer sheath, this cable effectively blocks electromagnetic interference from heavy machinery and vehicle circuits. Molded thick reinforced strain relief at both connector roots prevents internal wire fracture from frequent plugging, pulling and vibration during all-day continuous precision measurement tasks.
Core Advantages & Practical Structural Design
- Standard Lemo 1B 8Pin Male to Lemo 0B 5Pin Male layout, direct plug-and-play replacement for original factory GEV219 power cable
- Standard 1.8m total length, sufficient slack for tripod-mounted premium instrument and ground-placed external battery without tension on power ports
- 100% original factory pinout replication, supports stable high-current power output for robotic auto-tracking, long-range reflectorless EDM and continuous GNSS satellite tracking
- High-conductivity thick copper wire core, ultra-low voltage drop, no power attenuation even under full-load long-hour instrument operation
- Double shielding construction, eliminates power noise interference to instrument measurement signal and RTK differential data link
- Flexible weatherproof PUR cable jacket, remains soft and intact under freezing mountain winter and high-temperature tunnel construction environments
- Twist bayonet locking Lemo connectors on both ends, avoids accidental disconnection during field walking, instrument moving and bumping
- Wide compatibility: TS30/TM30/TM50/MS50 robotic stations, GS10/GS14/GS15 GNSS receivers, TDRA6000 laser station, perfectly matched with GEB171, GEB371 external batteries
- Compatible matching accessory: Trimble TSC3 / TSC2 Yellow Nylon Carrying Case ($25, 0.2kg, 18 × 12 × 10 cm)
- Lightweight foldable design, easy to roll and store in front accessory pouch alongside other GEV power cables and antenna brackets
Long-Duration Premium Instrument Power Supply & Application Scenarios
Mandatory external power accessory for high-precision tunnel control survey, long-term building deformation monitoring, mine geodetic mapping, railway engineering layout and CORS reference station maintenance projects. Survey engineers connect TS30/TM30 robotic stations or GS series GNSS receivers to GEB171 external battery via GEV219 cable to extend continuous working time to over 14 hours, eliminating sudden instrument shutdown caused by exhausted built-in batteries mid-measurement. Consistent stable voltage guarantees flawless automatic target tracking and high-precision distance measurement without power fluctuation errors. Store this external power cable and other tiny survey peripherals in our high-visibility yellow nylon data collector case; reinforced canvas belt loop supports waist hanging for convenient all-day field transport across large construction and mining sites.
Product Specifications
| OEM Article Number | GEV219 / 758469 |
|---|---|
| Connector Layout | Lemo 1B 8Pin Male Bayonet Lock to Lemo 0B 5Pin Male |
| Standard Cable Length | 1.8 Meters |
| Outer Jacket Material | Weatherproof Wear-Resistant PUR Insulation |
| Matched High Precision Instruments | TS30, TM30, TM50, MS50 Robotic Multistation, TDRA6000 Laser Station |
| Compatible GNSS Receivers | GS10, GS14, GS15 Viva Series |
| Matching External Battery Packs | GEB171, GEB371 High Capacity External Batteries |
| Core Function | External high-current power supply for premium Leica survey instruments |
| Unit Net Weight | 0.16 kg |
| Stock Status | In Stock, Fast 24-Hour Global Dispatch |
| Matching Carry Case Specs | Yellow Wear-Resistant Nylon Case, Price $25, Weight 0.2kg, Dimension 18 × 12 × 10 cm |
Matching Survey Accessory: Trimble TSC3 / TSC2 Carrying Case ($25)
Constructed with thick tear-proof nylon fabric, this bright yellow field protective bag shields Trimble TSC2 & TSC3 handheld data collectors from scratches, dirt and minor impact damage. Equipped with solid canvas belt loop for waist mounting, the independent front storage compartment holds GEV219 external power cables, other GEV series power leads, GAD antenna arms and screen protectors. 20 units available in warehouse for immediate worldwide shipping.
Browse more Leica premium instrument power cables, serial communication wires, RF coaxial antenna cables and robotic station spare parts on xsurveying.com. We supply full series OEM-standard power wiring accessories to deliver stable long-duration power and uninterrupted high-precision geodetic measurement workflows.
