|
Price: $45.99 | Compatible Devices: Pacific Crest PDL HPB 35W UHF Radio, Leica GS10/GS14/GS15/GS18 GNSS RTK, A00470 PDL Programming Cable; Matching Accessories: PDL Radio Mount Bracket, Tripod Pole Adapter, 5/8″ Survey Thread Converter
This full OEM PDL whip antenna kit solves UHF radio transmission defects for field RTK survey: original antenna whip fracture after collision, corroded BNC connector causing signal attenuation, low gain short antenna leading to short communication distance, single antenna without mounting hardware difficult to fix on survey pole, inferior unshielded feeder cable prone to field electromagnetic interference, and mismatched impedance causing radio power reflection damage RF module. Standard 430–450MHz survey UHF high-gain whip antenna matched with full installation accessory pack, stable long-distance differential data transmission for open-pit mine topographic survey, highway control network layout, tunnel deformation monitoring and large-area rural cadastral mapping RTK projects.
Product Overview
The PDL complete whip antenna kit is a full UHF radio signal transmitting/receiving assembly exclusively matched with Pacific Crest PDL HPB 35W survey RTK radio. Complete integrated kit structure: high-gain flexible fiberglass whip antenna rod + integrated waterproof BNC male connector + 1.5m double shielded 50Ω feeder cable + metal antenna mounting base + rubber shock-absorbing anti-vibration gasket + 5/8-11 standard survey thread adapter + fixing lock nut assembly. The antenna core adopts lightweight flexible fiberglass material, bendable without permanent breakage after mountain rock collision and backpack extrusion, outer wear-resistant UV-proof black rubber sheath to prevent aging cracking under long-term outdoor sunlight exposure. Internal copper coaxial cable double braided shielding structure, 50Ω standard impedance perfectly matched PDL radio RF circuit, eliminate standing wave reflection damage to radio power amplifier. Waterproof sealed BNC connector with built-in O-ring gasket, IP65 dust and splash protection to resist tunnel slurry, rainwater and construction mud corrosion. Universal 5/8-11 standard survey thread base, directly install on survey poles, tribrachs and tripod side brackets without extra conversion adapters. All installation accessories pre-equipped, plug-and-play without separate purchasing fixing parts for base/rover radio setup.
Core Advantages & Practical Structural Design
- 100% OEM UHF frequency band, 50Ω impedance, BNC interface and mounting dimension fully consistent with original PDL whip antenna, full kit one-stop replacement for broken, signal-attenuated original radio antenna assembly
- High-gain flexible fiberglass whip rod, bend impact-resistant design, solve rigid metal antenna easy fracture defect in rough mountain construction terrain
- Double-layer braided copper shielded 1.5m coaxial feeder cable, strong anti-electromagnetic interference ability, avoid differential signal loss caused by construction machinery and high-voltage line noise
- IP65 waterproof sealed BNC connector with built-in O-ring anti-leakage gasket, long-term stable conductive without oxidation in high-humidity tunnel and rainy open-air environments
- Complete full-set mounting accessories: metal shock-absorbing base, anti-vibration rubber pad, standard 5/8″ survey thread adapter and lock nut, directly fixed on survey pole/tripod for base station and rover station dual use
- Standard survey UHF 430–450MHz working band, compatible with all domestic and international legal survey radio frequency segments, stable long-distance RTK differential transmission
- Wide cross-device compatibility: Pacific Crest PDL HPB 35W high-power radio, all Leica GS series GNSS RTK receivers, matched with A00470 PDL programming composite cable for radio parameter debugging
- Compatible matching accessory: Trimble TSC3 / TSC2 Yellow Nylon Carrying Case ($25, 0.2kg, 18 × 12 × 10 cm)
- Detachable split kit design, each accessory independent packaging, easy classified storage in instrument maintenance tool pouch alongside A00470 programming cables, NovAtel OEM729 GNSS boards and radio power accessories
PDL Radio RTK Base/Rover Station Field Survey & Maintenance Application Scenarios
Necessary full-set radio signal transmission maintenance accessory for rural large-area cadastral boundary mapping, municipal highway control network measurement, urban tunnel long-term deformation monitoring, open-pit mine high-precision topographic survey and bridge static observation Leica GNSS RTK projects. When original PDL antenna breaks, connector corrodes or communication distance sharply shortens, survey technicians directly adopt this complete whip antenna kit, quickly install on survey pole to restore full-range stable UHF differential signal transmission, eliminate frequent RTK fixed solution dropout caused by weak radio signal. Flexible fiberglass whip and shock-absorbing base reduce antenna fracture risk during cross-site moving; double shielded feeder cable effectively suppress field electromagnetic interference to guarantee uninterrupted centimeter-level positioning all day. Store this PDL full whip antenna kit and other tiny survey maintenance peripherals in our high-visibility yellow nylon data collector case; reinforced canvas belt loop supports waist hanging for convenient cross-region field instrument repair transport.
Product Specifications
| Official Product Name | PDL Whip Antenna Complete Installation Kit For PDL HPB 35W Radio |
|---|---|
| Working Frequency Band | Survey UHF 430MHz – 450MHz |
| Nominal Impedance | Standard 50Ω RF Matching Impedance |
| Antenna Rod Material | Flexible Impact-Resistant Fiberglass With UV Anti-Aging Rubber Outer Sheath |
| Signal Feeder Cable | 1.5m Double Braided Copper Full Shielded Coaxial Cable |
| Radio Connection Interface | Waterproof Sealed BNC Male Connector With Built-In O-Ring Gasket (IP65) |
| Full Kit Included Parts | Whip Antenna Rod, Shielded Feeder Cable, Metal Mount Base, Shock-Absorbing Rubber Pad, 5/8-11 Thread Adapter, Lock Nut |
| Applicable Radio Model | Pacific Crest PDL HPB 35W High Power UHF Survey RTK Radio |
| Compatible GNSS Equipment | Leica GS10, GS14, GS15, GS18 Full Series RTK Base & Rover Hosts |
| Mounting Standard | Universal 5/8″ x11 UNC Survey Pole/Tribrach Thread Interface |
| Operating Temperature Range | -30℃ ~ +60℃, Adapt To Mine, Tunnel, Plateau All-Weather Construction |
| Core Function | Complete OEM UHF whip antenna kit for long-distance stable differential data transmit/receive of PDL HPB RTK radio base & rover station |
| Unit Net Weight | 0.165 kg |
| Stock Status | In Stock, Fast 24-Hour Global Dispatch, Independent Shockproof Plastic Bag Full Set Packaging |
| Matching Carry Case Specs | Yellow Wear-Resistant Nylon Case, Price $25, Weight 0.2kg, Dimension 18 × 12 × 10 cm |
Matching Survey Accessory: Trimble TSC3 / TSC2 Yellow Nylon Carrying Case ($25)
Constructed with thick tear-proof nylon fabric, this bright yellow field protective bag shields Trimble TSC2 & TSC3 handheld data collectors from scratches, dirt and minor impact damage. Equipped with solid canvas belt loop for waist mounting, the independent front storage compartment holds full PDL whip antenna kits, A00470 PDL programming composite cables, NovAtel OEM729 GNSS receiver boards, radio power supply adapters and instrument mechanical maintenance spare parts. 20 units available in warehouse for immediate worldwide shipping.
Browse more Pacific Crest PDL radio supporting accessories, UHF whip antenna kits, programming cables and GNSS positioning hardware on xsurveying.com. We supply full series OEM-standard survey radio transmission accessories to restore long-distance stable differential signal transmission of PDL HPB RTK radio for uninterrupted open-pit, tunnel and highway centimeter-precision field measurement workflows.
