Accessories, Leica

Price: $62.99 | Compatible Instruments: TS30/TM30/TS50/TM50/MS50 Robotic Total Station, GS14/GS15 Viva GNSS RTK Receiver, ATX1230 Smart Antenna; Power Source: 12V Lead-Acid Car Battery / External Storage Battery Pack

This heavy-duty 565856 alligator clip external power cable solves long-hour field power shortage pain points: built-in instrument lithium battery short endurance for tunnel/mining all-day survey, generic thin wires causing voltage drop & auto instrument shutdown, loose cheap clips poor contact leading to power cut, lack of built-in fuse for short-circuit safety risk, inferior unshielded cable generating measurement signal interference, and cracked original factory power cords unable to connect vehicle storage batteries directly. 1:1 OEM pinout matched 8Pin Lemo connector delivers stable 12V high-current power supply for Leica high-precision robotic stations and Viva GNSS GPS receivers, supporting 12+ hours uninterrupted field measurement work.

Product Overview

The Leica 565856 GPS & total station external battery extension cable with official OEM part number 565856 is a dedicated 1.8-meter heavy-duty power lead exclusively designed for Leica premium high-precision survey instruments. Two-end connector layout: one end bayonet lock Lemo 1B 8Pin male plug matching external power port of TS/TM robotic station & GS series GNSS receiver; the other end insulated red/black alligator clips for direct clamping onto 12V vehicle storage battery or large-capacity external lead-acid battery pack. Built-in independent inline replaceable safety fuse module for overcurrent & short-circuit protection; thick multi-strand pure copper conductive core + full double-layer shielding structure, wear-resistant anti-aging black PUR outer sheath, wide temperature adaptability from -20℃ to +55℃, suitable for harsh construction, mountain, mine, tunnel and all-terrain field survey environments. Molded thick reinforced strain relief at both connector roots prevents wire breakage after frequent bending, pulling and transport vibration; fully insulated rubber coated alligator clips avoid accidental positive-negative short circuit during field wiring operation.

Core Advantages & Practical Structural Design

• Exclusive Lemo 1B 8Pin male bayonet lock interface, fully consistent with original factory pin assignment, direct plug-and-play replacement for damaged original 565856 power cable
• Standard 1.8m total length, enough slack for tripod-mounted instrument and ground-placed 12V storage battery layout without tight tension on instrument power port
• Thickened pure copper multi-strand wire core, ultra-low voltage drop under full-load long-hour operation, no EDM ranging failure or RTK fixed solution dropout caused by insufficient power
• Built-in replaceable inline safety fuse block, auto power-off protection for overcurrent & short circuit, effectively avoid instrument circuit burnout risk
• Double-layer full shielding internal wiring, isolate power supply electromagnetic noise interference, guarantee stable high-precision angle measurement and GNSS satellite signal tracking simultaneously
• Full rubber insulated heavy-duty alligator clips, large clamping opening firmly grip battery terminals, anti-slip, anti-oxidation, stable conduction without power interruption during field walking vibration
• Weatherproof flexible PUR outer jacket, anti-mud, anti-UV, low-temperature resistant, remains soft without hardening in cold mountain and tunnel construction environments
• Wide cross-series compatibility: TS30/TM30/TS50/TM50/MS50 robotic multistation, GS14/GS15 Viva GNSS RTK receiver, ATX1230 smart antenna, matches all standard 12V lead-acid external storage batteries
• Compatible matching accessory: Trimble TSC3 / TSC2 Yellow Nylon Carrying Case ($25, 0.2kg, 18 × 12 × 10 cm)
• Lightweight rollable design, easy to coil and store in instrument accessory pouch alongside GEV data cables, GHT mounting brackets and spare lithium batteries

All-Day Long-Duration Field Power Supply Application Scenarios

Mandatory heavy-duty external power accessory for long-term tunnel control survey, mountain mine geodetic mapping, highway & railway high-precision layout, large-area cadastral boundary measurement and building foundation deformation monitoring projects. Survey crews clamp red/black alligator clips onto 12V vehicle or portable lead-acid battery, connect 8Pin Lemo plug to TS30 robotic station or GS15 GNSS GPS receiver, realizing 12+ hours continuous uninterrupted measurement without frequent battery replacement mid-work. Built-in fuse safety structure eliminates circuit damage risk from accidental positive-negative short wiring; double shielding design prevents power noise from disturbing ultra-precise survey data collection. Store this 565856 battery clip power cable and other small survey peripherals in our high-visibility yellow nylon data collector case; reinforced canvas belt loop supports waist hanging for convenient cross-region field transport.

Product Specifications

Matching Survey Accessory: Trimble TSC3 / TSC2 Yellow Nylon Carrying Case ($25)

Constructed with thick tear-proof nylon fabric, this bright yellow field protective bag shields Trimble TSC2 & TSC3 handheld data collectors from scratches, dirt and minor impact damage. Equipped with solid canvas belt loop for waist mounting, the independent front storage compartment holds 565856 battery clip power cables, GEV series data transfer leads, GHT controller holders and touch screen protectors. 20 units available in warehouse for immediate worldwide shipping.

Browse more Leica robotic station & GNSS GPS external power cables, GEB spare batteries, charging docks and survey mechanical spare parts on xsurveying.com. We supply full series OEM-standard survey power wiring accessories to realize stable long-hour external power supply and uninterrupted high-precision field measurement workflows.